20# Round Bar C20 Carbon Steel Round Bar

20# Round Bar Description

20# Round Bar belongs to low-carbon carbon steel, which is cold extruded, carburized and quenched steel. 20# Round Steel Bar belongs to the GB/T 699-2015 standard. 20# Round Bar has low strength, contains elements such as carbon, silicon, and manganese, and 20# Round Steel has good toughness, plasticity, weldability, and cutting performance. The tensile strength is 253-500MPa, and the elongation is ≥ 24%.

20# Round Bar is suitable for manufacturing small and medium-sized carburizing, carbonitriding and other parts that are not important in automobiles, tractors and general machinery manufacturing, such as handbrake shoes, lever shafts, gearbox speed forks, and transmission passives on cars. Gears and tractor camshafts, suspension equalizer shafts, equalizer inner and outer bushings, etc.; 20# Round Bar used in hot-rolled or normalized conditions to manufacture various mechanical parts that require low stress but require high toughness; in heavy and medium-sized machinery In manufacturing, such as forged or pressed tie rods, shackles, levers, sleeves, clamps, etc.

The performance of 20# Round Bar can be further improved through different heat treatment methods. For example, normalizing treatment can improve the strength and hardness of steel, while also improving its toughness and cutting performance; Quenching treatment can achieve higher strength and hardness, but it will reduce its toughness and plasticity; Tempering treatment can eliminate the internal stress generated by quenching, while improving the toughness and plasticity of the steel.

20# Round Bar Datasheet

20# Round Bar Chemical composition

20# Round Bar Mechanical Properties

Equivalent Grade of 20# Round Bar