NM400 Wear Resistant Steel NM400 Abrasion Resistant Plate

NM400 Wear Abrasion Resistant Steel Plate Description

NM400 Abrasion Resistant plate is a high-strength wear-resistant steel plate with high wear resistance, 400 is the Brinell hardness value HB value. The wear-resistant steel plate has high wear resistance and good impact performance, and can be cut, bent, welded, etc., and can be connected with other structures by welding, plug welding, bolt connection, etc., which saves time in the process of repairing the site , convenience and other features, widely used in metallurgy, coal, cement, electric power, glass, mining, building materials, bricks and tiles and other industries

NM400 wear-resistant steel is a new type of high-alloy steel plate produced in modern times. It has comprehensive characteristics such as high strength, good toughness and welding performance, and its service life is 5-10 times higher than that of carbon steel structure buildings for general structures; it can withstand large loads and impact loads and high friction coefficients; Long-term safe work under wet or dry conditions without rust, corrosion and scaling; good weather resistance: good adaptability to atmospheric temperature changes (-40 ~ 120 ° C), good frost resistance; good processing performance ;Light weight and high strength.

Applicaiton of NM400 Wear/Abrasion Resistant steel plate:
1. Construction machinery and equipment: loader, bulldozer, excavator, bucket plate, side edge plate, bucket bottom plate, blade, thinking plate.
2. Loading and unloading mechanical equipment: unloading mill chain plate, hopper lining plate, grab blade plate, medium-sized automatic dump truck tipping plate.
3. Construction machinery and equipment: cement pusher tooth plate, concrete mixer liner, mixing floor liner, dust collector liner.
4. Metallurgical machinery and equipment: iron ore sintering conveying elbow, iron ore sintering machine lining, scraper machine lining.
5. Mining machinery and equipment: mineral materials, stone crusher liners, blades.
6. Other mechanical equipment: sand mill cylinder, blades, wear-resistant parts of various port machinery.
7. Thermal power equipment: Coal mill liner, coal bucket, coal distribution pipe, coal distributor grid, coal unloading equipment liner.
8. Shot blasting machinery and equipment: Shot blasting machine liner.

NM400 Wear Abrasion Resistant Steel Plate Datasheet

Thickness: 4-100mm
Width: 0.9m-4.7m
Length: 5m-18m or as required
Standard: GB/T24186
Technique:Hot rolled
Surface Treatment: Clean, blasting and painting according to customer requirement
Thickness tolerance: ±0.1mm

NM400 Wear Abrasion Resistant Steel Plate Chemical composition

NM400 Wear Abrasion Resistant Steel Plate Mechanical Properties

Provide the measured values ​​of steel plate tensile properties Rp0.2, Rm, A50.

Provide the measured value (AKV) of longitudinal impact of the steel plate at 0°C and -20°C.

Equivalent Grade of NM400 Wear Abrasion Resistant Steel Plate