EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels

EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels Description

X2CrNiMnMoN25-18-6-5 is also name EN 1.4565 Stainless steel, it is a superaustenitic (highly alloyed) stainless steel, EN 10088-1 X2CrNiMnMoN25-18-6-5 steel formulated for primary forming into wrought products. Cited properties are appropriate for the solution annealed (AT) condition. 1.4565 is the EN 10088-1 numeric designation for this material. X2CrNiMnMoN25-18-6-5 is the EN 10088-1 chemical designation.

X2CrNiMnMoN25-18-6-5 alloys steel have ultra-high strength, superior toughness characteristics and weldability. Typically, these alloys are used in aerospace applications, machinery and tooling and ordnance components and fasteners, the X2CrNiMnMoN25-18-6-5 stainless steel is also application into Medical equipment, Chemical equipments, Mechanical parts used in the condition of corrosion resistance, Bolt and nut Pressure vessel

France AFNOR NF X2CrNiMnMoN25-18-6-5 Stainless steels. List of stainless steels and Mechanical Properties, Chemical Element, Cross Reference.

Type and Size of X2CrNiMnMoN25-18-6-5 Steel:
Round bar / Wire rod (Diameter):  0.50mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.

Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm. 

Heat treated : 1914°C - 1146°C

EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels Datasheet

EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels Chemical composition

EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels Mechanical Properties

Equivalent Grade of EN 10088-1 X2CrNiMnMoN25-18-6-5 Steels